Robot turntable and pose test

About this preset

Use cases

• A reveal loop for a robotics launch page
• A silent turntable running on a trade show screen
• A portfolio reel shot of one design turning
• A spec page hero showing the joints working
• The opening beat of a hardware explainer

• 

  Service robot on a studio turntable, 16:9, one continuous take with an articulation move

  Design studio turntable, 16:9, one continuous shot with no cuts. A humanoid service robot stands on a matte grey turntable in a soft dark studio void, and the turntable turns steadily throughout the whole shot: the robot faces the camera at the start, presents its side halfway through, and has its back to the camera by the end. Hard surface build: matte white composite shell panels with visible parting lines, dark grey articulated joints at shoulder, elbow, hip and knee with exposed cable routing, a smooth visor head with a single soft cyan indicator, rubber tread footpads. As it comes round it raises one arm out to shoulder height. The camera holds a locked wide with the whole figure in frame and headroom above, no cuts and no camera move: all of the rotation comes from the turntable. One soft key from high left, a cool rim light picking out every panel edge, a soft reflection on the dark floor. The robot is unbranded, carrying no logo, wordmark or trademark of any kind, and every surface is clean and unlettered. Quiet studio room tone with faint servo movement as the joints work, no music. No on-screen text, no watermark. Use only the brand names, logos and trademarks the customer includes in their request; never add real-world brands, logos or trademarked designs the customer did not mention.

• 

  Quadruped inspection robot on a studio turntable, 16:9, one continuous take with a leg lift

  Design studio turntable, 16:9, one continuous shot with no cuts. A four legged inspection robot stands on a matte grey turntable in a soft dark studio void, and the turntable turns steadily throughout the whole shot: the robot faces the camera at the start, presents its side halfway through, and has its back to the camera by the end. Hard surface build: a low sealed body in matte white composite with visible parting lines, four articulated legs with slate grey hip and knee joints, exposed cable routing along each thigh, rubber pad feet, and a small sensor turret with a single soft blue lens on the front of the body. As it comes round it slowly lifts one front leg, folds it under its body, and sets it down again. The camera holds a locked wide with the whole machine in frame and headroom above, no cuts and no camera move: all of the rotation comes from the turntable. One soft key from high left, a cool rim light picking out every panel edge, a soft reflection on the dark floor. The robot is unbranded, carrying no logo, wordmark or trademark of any kind, and every surface is clean and unlettered. Quiet studio room tone with faint servo movement as the joints work, no music. No on-screen text, no watermark. Use only the brand names, logos and trademarks the customer includes in their request; never add real-world brands, logos or trademarked designs the customer did not mention.

• 

  Industrial robot arm on a studio turntable, 16:9, one continuous take with an elbow unfold

  Design studio turntable, 16:9, one continuous shot with no cuts. A heavy six axis industrial robot arm on a squat cast iron base stands on a matte grey turntable in a soft dark studio void, and the turntable turns steadily throughout the whole shot: the arm faces the camera at the start, presents its side halfway through, and shows its back by the end. Hard surface build: matte graphite grey cast housings with visible parting lines, brushed copper joint covers at the shoulder, elbow and wrist, bundled cable dressing running up the arm, an exposed steel counterweight, and a two finger steel gripper at the wrist. As it comes round it slowly unfolds at the elbow, raising the gripper from a folded rest pose to about head height, and holds there. The camera holds a locked wide with the whole machine in frame and headroom above, no cuts and no camera move: all of the rotation comes from the turntable. One soft key from high left, a cool rim light picking out every casting edge, a soft reflection on the dark floor. The arm is unbranded, carrying no logo, wordmark or trademark of any kind, and every surface is clean and unlettered. Quiet studio room tone with a low servo whine as the joint works, no music. No on-screen text, no watermark. Use only the brand names, logos and trademarks the customer includes in their request; never add real-world brands, logos or trademarked designs the customer did not mention.

• Seedance 2.5

  video

  Credits per generation

  65 credits per 5s clip

  Create with Seedance 2.5

• Veo 3.1 Fast

  video

  Credits per generation

  28 credits per 5s clip

  Create with Veo 3.1 Fast